All Materials of our commercial stainless steel sinks are taken from our Base contract and can be fully certified.
All Stainless Steel Commercial Sink Bowls are manufactured on-site.
From 1.2mm 304 (1.4301) and 316 (1.4404) Stainless Steel.
There are three primary Bowl Sizes with the most popular 304 Stainless Steel Bowls held as standard stock items.
Fellow’s commercial stainless steel sinks are ideal for commercial kitchen sinks, such as restaurant sinks, underbar sinks, utility sinks, and an array of other foodservice/food preparation environments including general use such as hand washing.
Due to having all the manufacturing facilities, on-site Fellows can manufacture small bespoke batches at a slight premium. We cater for most non-standard Bowl depths and outlet waste configurations.
If what you require is not in stock, small-batch requirements can be scheduled in with our next standard stock Bowl run.
A Raw edge trimmed version is also available made to order.
| Description | 610mm x 455mm | 500mm x 400mm | 400mm x 400mm |
|---|---|---|---|
| Material | Stainless Steel 304 | Stainless Steel 304 | Stainless Steel 304 |
| Depth | 300mm | 300mm | 300mm |
| Depth | 250mm | 250mm | 250mm |
| Standard Waste Position | Corner Rear LH or RH | Corner Rear LH or RH | Corner |
| Standard Waste Fitting | 1.5" / 38.1mm with 86mm Flange | 1.5" / 38.1mm with 86mm Flange | 1.5" / 38.1mm with 86mm Flange |
| Basket Waste Position | Corner Rear LH or RH | Corner Rear LH or RH | Corner |
| Finish | De-Scaled 2b | De-Scaled 2b | De-Scaled 2b |
| Bowl Weight 300mm | 6.25Kg | 5.1Kg | 4.3Kg |
| Bowl Weight 250mm | 5.95Kg | 4.75Kg | 3.85Kg |
| Flange - Cropped | Standard 20mm | Standard 20mm | Standard 20mm |
| Raw Edge Bowl Weight - Made To Order | 5.85Kg | 4.66Kg | 3.84Kg |
| Description | 610mm x 455mm | 500mm x 400mm | 400mm x 400mm |
|---|---|---|---|
| Material | Stainless Steel 304 | Stainless Steel 304 | Stainless Steel 304 |
| Depth | 300mm | 300mm | 300mm |
| Depth | 250mm Made to Order | 250mm Made to Order | 250mm Made to Order |
| Standard Waste Position | Corner Rear LH or RH | Corner Rear LH or RH | Corner |
| Standard Waste Fitting | 1.5"/ 38.1mm with 86mm Flange | 1.5"/ 38.1mm with 86mm Flange | 1.5"/ 38.1mm with 86mm Flange |
| Basket Waste Position | Corner Rear LH or RH | Corner Rear LH or RH | Corner |
| Finish | De-Scaled 2b | De-Scaled 2b | De-Scaled 2b |
| Bowl Weight 300mm | 6.85Kg | 5.1Kg | 4.3Kg |
| Flange - Cropped | Standard 20mm | Standard 20mm | Standard 20mm |
A quality sink strainer by Fellows Catering Equipment is ideal for preventing blockages of food or other debris.
Raising of the internal tube opens the waste to permit drainage. Whilst the perforated sleeve is retained in place preventing the passing of larger solids.
To compliment the Fellows range of Stainless Steel Sink Bowls there is a range of Upstand Sink Strainers Wastes to accommodate different Bowl depths.
Manufactured from 304 Stainless Steel with a Brush Finish and Polyproplene End Caps. The Fellows Standard Upstand Waste is designed to prevent larger food particles from entering the Waste outlet and causing blockages within the sink drain during the washing of Cutlery and Utensils.
The Fellows Upstand waste system has been widely used within the catering industry for many years. Including regular working day kitchen sinks. upgraded circa 2010 the unit is now distinguishable in the market place by its colour and the incorporation of the Fellows name moulded into the Top Cap.
The Fellows Upstand and Waste sink strainers assembly is designed as a close fitting system. Also, sufficiently adequate for the release of the internal sealing tube to be raised. Therefore, releasing dirty water whilst that Strainer Tube is retained in position.
The Tubing is sourced from an approved supply partner. and the End Caps are manufactured on Fellows owned tooling, again from a local approved supply partner.
Upstands are then assembled checked and packaged in house at Fellows.
Want to see more? check out our other Catering Equipment like our Wash Hand Basins
| Upstand Strainer Lengths | Standard Waste Fitting | Waste Fitting |
|---|---|---|
| 10 inch / 254mm | 1.5" / 38.1mm with 86mm Flange | Brass - Chrome Plated |
| 12 inch / 305mm | 1.5" / 38.1mm with 86mm Flange | Brass - Chrome Plated |
| 14 inch / 355mm | 1.5" / 38.1mm with 86mm Flange | Brass - Chrome Plated |
Upstand Strainer Wastes are supplied Ex Stock.
